Mutation
Crea percorso
Crea un nuovo percorso usando la mutation createRoute. È utile quando vuoi calcolare le tappe di ricarica, il consumo energetico e il tempo di guida tra un punto di partenza e una destinazione.
Mutation
Per creare un percorso sono necessari vehicle, origin e destination. Facoltativamente aggiungi punti via, operators, weather o altre preferenze per affinare il calcolo. La mutation restituisce un id del percorso, che può essere usato per recuperare i dettagli del percorso, le emissioni o i servizi lungo il tragitto.
Argomenti
input· CreateRouteInput· requiredCampi
ID· IDLe operazioni possono non riuscire. Tieni conto dei seguenti scenari di errore per gestirli correttamente. Ulteriori informazioni sugli errori here.
alternative_station_radius_above_allowed- The radius value is above allowed, the maximum value is $VALUE $UNIT.
alternative_station_radius_below_allowed- The radius value is below allowed, the minimum value is $VALUE $UNIT.
cabin_desired_temperature_above_allowed- The provided desired cabin temperature is too high. The value must be less than or equal to $VALUE $UNIT.
cabin_desired_temperature_below_allowed- The provided desired cabin temperature is too low. The value must be greater than or equal to $VALUE $UNIT.
conflicting_weather_parameters- Invalid combination: 'weather.type' and 'season' cannot be used together.
consumption_exceeded- Provided consumption value for $LOCATION is not valid. The value must be between 0 and $MAXVALUE kwh, or the equivalent in another unit, for this vehicle.
custom_air_pressure_above_allowed- The provided custom air pressure is too high. The value must be lower than or equal to $VALUE $UNIT.
custom_air_pressure_below_allowed- The provided custom air pressure is too low. The value must be greater than or equal to $VALUE $UNIT.
custom_solar_irradiance_above_allowed- The provided custom solar irradiance is too high. The value must be lower than or equal to 1200 $UNIT.
custom_solar_irradiance_below_allowed- The provided custom solar irradiance is too low. The value must be greater than or equal to 0 $UNIT.
custom_temperature_above_allowed- The provided custom temperature is too high. The value must be lower than or equal to $VALUE $UNIT.
custom_temperature_below_allowed- The provided custom temperature is too low. The value must be greater than or equal to $VALUE $UNIT.
invalid_weather_input- weather.custom cannot be used when weather.type is not set to CUSTOM.
missing_custom_weather_parameters- weather.custom must be provided when weather.type is set to CUSTOM.
negative_value_not_allowed- Negative value for $LOCATION is not allowed.
occupants_above_allowed- Provided number of occupants for $LOCATION is not valid. The value must be less than or equal to $OCCUPANTSCOUNT for this vehicle.
occupants_below_allowed- Provided number of occupants for $LOCATION is not valid. The value must be at least 1.
occupants_not_specified- Total occupant weight requires occupants to be specified for $LOCATION.
operator_both_excluded_and_ranking- Operator $OPERATORID is both in the ranking and excluded lists.
operator_duplicated_in_avoid- Operator $OPERATORID is multiple times in the avoid lists.
operator_duplicated_in_exclude- Operator $OPERATORID is multiple times in the exclude lists.
operator_duplicated_in_ranking- Operator $OPERATORID is multiple times in the ranking lists.
operator_in_avoid_and_excluded- Operator $OPERATORID is set in both avoid and excluded for [$COUNTRIES].
operator_in_multiple_ranking_levels- Operator $OPERATORID is set in multiple ranking levels for [$COUNTRIES].
operator_in_ranking_and_avoid- Operator $OPERATORID is set in both ranking and avoid for [$COUNTRIES].
operator_in_ranking_and_excluded- Operator $OPERATORID is set in both ranking and excluded for [$COUNTRIES].
operator_not_found- No operator was found with the $OPERATORID ID.
operator_ranking_none_given- The route operator type was set to $ROUTEOPTYPE, but no ranking was provided. Please add an operator to your client or route request.
route_alternatives_above_allowed- Provided number of alternative routes is not valid. The value must be lower than or equal to 2.
route_alternatives_below_allowed- Provided number of alternative routes is not valid. The value must be higher than or equal to 0.
route_battery_capacity_above_allowed- The provided battery capacity is too high. The value must be less than or equal to $MAX kwh or the equivalent in another unit.
route_battery_capacity_below_allowed- The provided battery capacity is too small. The value must be greater than or equal to $MIN kwh or the equivalent in another unit.
route_cargo_below_allowed- Provided amount of cargo weight is not valid. The value cannot be negative.
route_destination_invalid_properties- Destination properties are invalid. $MESSAGE
route_destination_location_missing- Missing location data for the destination. The destination must include at least one of the following: geometry coordinates, station_id or external_station_id.
route_destination_station_and_external_station_not_matching- The destination station for the route requested was not matched with the external station.
route_destination_station_invalid_charger- The provided destination station $STATIONID cannot be used as charging stop. The charger standard of the vehicle is not supported.
route_destination_station_invalid_speed- The provided destination station $STATIONID cannot be used as charging stop. The station does not support DC charging (> 43kW).
route_destination_station_not_found- The destination station for the route requested was not found with the provided ID.
route_destination_station_out_of_service- The provided destination station $STATIONID cannot be used as charging stop. All compatible connectors at this station are out of service.
route_final_soc_too_high- The provided final state of charge is too high. The value must be less than or equal to 80% of the vehicle battery capacity.
route_invalid_destination_coordinates- The destination coordinates provided are not valid.
route_invalid_maximum_state_of_charge- Invalid maximum_state_of_charge: must be an integer between 80 and 100 (inclusive).
route_invalid_origin_coordinates- The origin coordinates provided are not valid.
route_invalid_safe_risk_margin- Safe risk margin needs to be a value between 0 and 60.
route_invalid_via_coordinates- The via coordinates provided are not valid.
route_min_power_below_allowed- The provided minimum power is too small. The value must be greater than 0.
route_occupant_weight_below_allowed- Provided occupant weight is not valid. The value cannot be negative.
route_same_coordinates_consecutive_via- The coordinates of consecutive via points cannot be the same.
route_same_coordinates_origin_destination- The origin coordinates cannot be the same as the destination coordinates.
route_same_coordinates_origin_via- The origin coordinates cannot be the same as the (first) via point coordinates.
route_same_coordinates_via_destination- The (last) via coordinates cannot be the same as the destination coordinates.
route_speed_factor_above_allowed- The speed factor is too high. The value must be equal or lower than 1.20.
route_speed_factor_below_allowed- The speed factor is too low. The value must be equal or higher than 0.8.
route_station_invalid_charger- The provided via station $STATIONID cannot be used as charging stop. The charger standard of the vehicle is not supported.
route_station_invalid_min_power- The minimum power requested is higher than the station could support.
route_station_invalid_speed- The provided via station $STATIONID cannot be used as charging stop. The station does not support DC charging (> 43kW).
route_station_invalid_truck_only- The station selected as via is restricted to heavy-duty trucks and is not accessible to this vehicle.
route_station_out_of_service- The provided via station $STATIONID cannot be used as charging stop. All compatible connectors at this station are out of service.
route_traffic_aware_disabled- Traffic-aware routing is not enabled for your project. Please contact support to activate this feature.
route_traffic_aware_invalid_departure_date- Traffic-aware routing is not supported for past departure dates. Omit the {departure_time path} or set it to a date in the future.
route_via_cargo_below_allowed- Provided amount of cargo is not valid. The value must be greater than 0.
route_via_invalid_properties- Via properties are invalid. $MESSAGE
route_via_location_missing- Missing location data for one or more vias. All vias must include at least one of the following: geometry coordinates, station_id or external_station_id.
route_via_station_and_external_station_not_matching- The via station for the route requested was not matched with the external station.
route_via_station_missing_station_identifier- Via properties are invalid. A station ID or external station ID must be provided to use a station as a via point.
route_via_station_not_found- The station ID used as a via for the requested route was not found.
soc_exceeding_battery_capacity- The provided state of charge for $LOCATION is too high. The value must be less than or equal to the vehicle battery capacity.
station_destination_coordinates_not_matching- Coordinates [$DESTINATIONCOORDINATES] of destination don't match with station coordinates [$STATIONCOORDINATES].
station_via_coordinates_not_matching- Coordinates [$VIACOORDINATES] of via don't match with station coordinates [$STATIONCOORDINATES].
vehicle_type_not_allowed- Vehicle of type $TYPE is not allowed for this operation.
zero_or_negative_value_not_allowed- Zero or negative value for $LOCATION is not allowed.
Questo contenuto ti è stato utile?